Application ：
Wood adhesive
Wood glue
Adhesive for wood
Adhesive for wood to wood
Adhesive for wood to metal
Adhesive for wood to steel plate
Adhesive for wood to aluminum plate
Adhesive for moisture wood
Adhesive for wet wood
Adhesive for furniture
Carpenters wood glue
Adhesive for plywood
Adhesive for joint wood
Adhesive for MDF board to metal plate
Adhesive for MDF board to steel plate
Adhesive for MDF board to aluminum plate
Adhesive for fire rated door
Glue for wood ,glue for metal to wood , glue for steel plate to wood ,glue for aluminum plate to wood , glue for aluminum plate to wood , glue for moisture wood , glue for wet wood , glue for furniture , glue for plywood , glue for jointed wood , glue for MDF board to metal, glue for MDF board to steel plate , glue for MDF board to aluminum plate , glue for fire rate door , bond wood and wood , bond wood and metal , bond wood and steel plate , bond wood and aluminum plate , bond MDF board and metal plate , bond MDF board and steel plate , bond MDF board and aluminum plate , bond aluminum plate and MDF board ,bond steel plate and MDF board , bond metal plate and MDF board ,
The adhesive cures fast with good adhesion and excellent weather resistance. It can be used for bonding a variety of substrates, including plastic, sponge, leather, metal, paper faced gypsum board, calcium silicate board, PVC, calcined magnesia, rock wool, paper honeycomb, aluminum honeycomb, polystyrene foam, XPS extruded board, polywood, MDF, melamine paper board, phenol formaldehyde foam, etc. And it is widely applied for door manufacturing, light-weight building materials, refrigerator, purification equipment.
1.Polyurethane Glue is 100% waterproof once cured
2.It can be used with complete confidence on any project, indoor or outdoor, that is likely to be subjected to moisture or the direct application of water
3.It is totally suitable for patios, decks, outdoor furniture and marine applications
4.It is suitable for applying to most materials including all timbers, stone, metals, glass, ceramics, concrete (including pavers), brick and masonry
5.It will not deteriorate even with prolonged exposure to sun, salt, snow, rain, even chlorinated water and generally will cope with all weather conditions. It will not freeze after curing
6.A moisture-curing adhesive that cures by absorbing the moisture from the atmosphere and the surfaces to which the glue is applied
7.Environmentally friendly since it contains no solvents and is 100% pure polyurethane
8.Incredibly strong; will not deteriorate or become brittle with age
9.100% waterproof making it the most suitable adhesive to use on all outdoor applications
10.Will not freeze and will not contract or expand in freezing conditions.
11.pH neutral (Acid Free)
12.Greatly resistant to corrosion from solvents and chemicals
13.Super strong in all suitable applications
Instructions For Use 1.Step 1 Surfaces to be glued must be clean and free of contaminants Polyurethane Glue is best when both surfaces can absorb glue, but at least one surface must be porous.
2.Step 2 When gluing timber joints, it is wise to dampen the surface to be glued a few minutes before applying glue. You can use an atomiser spray or a sponge. This accelerates the curing
3.Step 3 Apply the glue to one surface only spreading it so that it completely coats the surface. Apply liberally, even though the glue will ooze out of the joints.
4.Step 4 Polyurethane Glue has an open time (that is, the time before which the two faces to be glued are brought together) of about 5-10 minutes. Within that time it is important to bring the two surfaces together.
5.Step 5 If necessary, clamp the joint securely, but not too firmly.
6.Step 6 After clamping you can sponge or scrape away the excess that squeezes out of the join. (If staining timber after curing, scrape, rather than wipe, the excess away. Avoid filling the pores on the face of the timber if possible).
7.Step 7 Leave the project for at least 3 to 4 hours (and up to 24 hours) before removal of clamps and continuation of work. The glue will completely cure in that time.
Polyurethane Glue - Storage & Care 1.Polyurethane Glue is supplied in High Density Polyethylene bottles with plastic witches' caps. The witches' cap has a fully removable click-on/click-off cover.
2.For first use, remove the click-on/click-off cover and snip the witches' cap with a blade or scissors at the line nearest the top of the cap.
3.Immediately replace the cover onto the cap, ensuring it properly clicks into place.
4.The contents of the bottle will remain usable for many months if the bottle is always stored in this position.
5.There is little chance of air getting into the bottle to cause the curing of the polyurethane.
6.It is best to store all adhesives in a cool dry place away from direct sunlight.
7.Immediately after use, wipe the nozzle of excess polyurethane and replace the cover over the cap, again ensuring it properly clicks into place.
8.If you are likely to be using the product many times during the course of your project, you must keep replacing the click-on/click-off cover between each and every use.
If any technology questions, please call us +0086 13422583570 (Ms.Ann) or email to easybondglue@gmail.com / info@polyurethaneglue-china.com |
Favorites 
Mail to us
